General Instructions:                        
Data Mapping worksheet [EDI 856 - 3 to SAP EM IDOC EVMSTA02]                            
Filteration criteria: This EVMSTA02 IDOC should be generated only when BNS06 field in the BSN segment = "AS"  
One IDOC should be generated for each unique HAWB_FCR in the EDI 856 - 3 transaction. Since the transaction can have multiple FCRs - the interface should generate one IDOC for each unique shipment number in the EDI transaction  
The IDOC should be generated for ADD (00), REPLACE (05) and DELETE CODES (03) (BSN01 = "00" or "03" or "05")  
Time Zone must be posted using the SAP Timezone format standards standard (use T-code STZBC to look up SAP Standard Timezone codes)
All fields in this mapping that are marked as " " should be considered hardcoded                    
   
Data Mapping:  
Data Type: [EDI 856 - 3 to SAP EM - EVMSTA02] [1]  
      TARGET SYSTEM FIELDS           DATA CONVERSION/EDITING LOGIC  
 [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12]  [13]
Field Data[14]    [15] Data Element Information[16]    [17]  [18]   Note[19] Conversion/Editing Logic[20] Conversion/[21] Source[22] Source[23] Source[24] Source[25]
Table Row No Field Name Short Text   Data No. of Data Field   Mapping Table Field Field Field
Name (Repeated Rows in the Table)     Value Type Char's Format Use   Rule Name Name Format Length
IDOC: EVMSTA02 in SCM 4.1 (DS2)                            
                         
IDOC Segment   IDOC Field Description                      
E1EDIDC 1 RCVSAD SADR Recipient =ISA07 CHAR 9 R                    
E1EDIDC 2 STDMES Message Type 856E3 CHAR 3 R   = when STO01 =856 and BSN06 = "AS"                
E1EDIDC 3 SNDSAD SADR Sender =ISA06 CHAR 9 R                    
E1EDIDC 4 REFINT Interchange File =ISA12 NUM 9 R                    
E1EDIDC 5 REFGRP Message Group =GS06 NUM 9 R                    
E1EDIDC 6 REFMES Reference Message =ST02 CHAR 9 R                    
                             
[Data Concept] Header Table -- E1EVMHDR02                            
E1EVMHDR02 1 EVTID Event Code ID "OCEAN_DEP" CHAR 50   R if BSN06 = 'AS' and BSN01 = 00 or 03 or 05, then EVTID = "OCEAN_DEP" Default        
E1EVMHDR02 1 EVTDAT Event Date   DATE 8 CCYYMMDD R if BSN06 = 'AS' and BSN01 = 00 or 03 or 05, then EVTDAT = DTM02 for DTM01 = "370" from shipment level loop (HL03 = 'S') Mapped DTM Segment at Shipment Level (HL03 = 'S') DTM02 for DTM01 = '370' DT 8
E1EVMHDR02 1 EVTTIM Event Time   TIME 6 HHMMSS R if BSN06 = 'AS' and BSN01 = 00 or 03 or 05, then EVTTIM = DTM03 for DTM01 = "370" from shipment level loop (HL03 = 'S') Mapped DTM Segment at Shipment Level (HL03 = 'S') DTM03 for DTM01 = '370' TM 4 to 8
E1EVMHDR02 1 EVTZON Event Time Zone   CHAR 6 SAP Standard Timezone Format R if BSN06 = 'AS' and BSN01 = 00 or 03 or 05, then EVTZON = DTM04 for DTM01 = "370" from shipment level loop (HL03 = 'S') Mapped DTM Segment at Shipment Level (HL03 = 'S') DTM04 for DTM01 = '370' ID 2
E1EVMHDR02 1 REPDAT Reporting Date   DATE 8 CCYYMMDD R Date when the transaction was received by the receiving system Default        
E1EVMHDR02 1 REPTIM Reporting Time   TIME 6 HHMMSS R Time when the transaction was received by the receiving system Default        
E1EVMHDR02 1 REPZON Reporting Time Zone   CHAR 6 SAP Standard Timezone Format R Time zone of the receiving system Default        
                             
E1EVMLID 1 LOCCOD Location code set "LCNR" CHAR 20   O              
E1EVMLID 1 LOCID1 Location Code ID - 1 Location Identifier CHAR 50   O Location id of the location where event happened = TD508 when TD504 = "S" and TD507 = "OR".             
[Data Concept] Tracking Identifications -- E1EVMTID                            
E1EVMTID 1 TRXCOD Tracking ID Code Set "SHNR" CHAR 10   R if BSN06 = 'AS' and BSN01 = 00 or 03 or 05, then E1EVMTID.TRXCOD = "SHNR" Default          
E1EVMTID 1 TRXID Tracking ID   CHAR 20   R if BSN06 = 'AS' and BSN01 = 00 or 03 or 05, then TRXID = REF02 when REF01 = 'AG' from the order level loop i.e HL03 = O Mapped REF Segment at order level (HL03 = 'O') REF02 for REF01 = 'AG' AN 1 to 30  
                         
E1EVMTID 1 TRXCOD Tracking ID Code Set "HAWBFCR" CHAR 10   R if BSN06 = 'AS' and BSN01 = 00 or 03 or 05, then E1EVMTID.TRXCOD = "HAWBFCR" Default          
E1EVMTID 1 TRXID Tracking ID   CHAR 20   R if BSN06 = 'AS' and BSN01 = 00 or 03 or 05, then TRXID = REF02 when REF01 = 'AW' from the order level loop i.e HL03 = O Mapped REF Segment at order level (HL03 = 'O') REF02 for REF01 = 'AG' AN 1 to 30  
[Data Concept] Reference Table - E1EVMREF02: Map only if the Required Qualifier (AO) is present in REF01 at the order level                              
E1EVMREF02 1 REFCOD Reference Code Set "OBOL" CHAR 20   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then REFCOD = "OBOL" Default          
E1EVMREF02 1 REFID Reference Code ID   CHAR 50   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then REFID = REF02 when REF01 = 'AO' Mapped REF Segment at order level (HL03 = 'O') REF02 for REF01 = 'AO' CHAR 1 to 30  
E1EVMREF02 1 REFUSAGE Reference Usage "T" CHAR 1   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then REFUSAGE = "T" Default          
E1EVMREF02 1 ACTION Action for Reference "A" or "D" CHAR 1   O  - if BSN06 = 'AS' and BSN01 = '00' or '05', then ACTION = "A"
 - if if BSN06 = 'AS' and BSN01 = '03', then ACTION = "D"		 Default          
[Data Concept] Reference Table - E1EVMREF02: Map only if the Required Qualifier (AW) is present in REF01 at the order level                            
E1EVMREF02 2 REFCOD Reference Code Set "HAWBFCR" CHAR 20   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then REFCOD = "HAWBFCR"            
E1EVMREF02 2 REFID Reference Code ID   CHAR 50   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then REFID = REF02 when REF01 = 'AW'   REF Segment at order level (HL03 = 'O') REF02 for REF01 = 'AW' CHAR 1 to 30  
E1EVMREF02 2 REFUSAGE Reference Usage "T" CHAR 1   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then REFUSAGE = "T"            
E1EVMREF02 2 ACTION Action for Reference "A" or "D" CHAR 1   O  - if BSN06 = 'AS' and BSN01 = '00' or '05', then ACTION = "A"
 - if if BSN06 = 'AS' and BSN01 = '03', then ACTION = "D"		            
[Data Concept] Reference Table - E1EVMREF02: Map only if the Required Qualifier (AO) is present in REF01 at the order level                            
E1EVMREF02 3 REFCOD Reference Code Set "OBOL_CNTR" CHAR 20   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then REFCOD = "OBOL_CNTR"            
E1EVMREF02 3 REFID Reference Code ID   CHAR 50   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then REFID = (REF02 when REF01 = 'AO') + TD302 + TD303    TD3 Segment at Shipment Level + REF Segment at order level (HL03 = 'O') (REF02 for REF01 = 'AO') + TD302 + TD303 CHAR 1 to 30  
E1EVMREF02 3 REFUSAGE Reference Usage "T" CHAR 1   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then REFUSAGE = "T"            
E1EVMREF02 3 ACTION Action for Reference "A" or "D" CHAR 1   O  - if BSN06 = 'AS' and BSN01 = '00' or '05', then ACTION = "A"
 - if if BSN06 = 'AS' and BSN01 = '03', then ACTION = "D"		            
[Data Concept]  Modification to Expected Event List -- T                            
E1EVMEEM 1 EVTID Event Code ID "Ocean_arrival" CHAR 50   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05' and DTM01 = '096'  and DTM02 exists then hardcode  EVTID = "Ocean_Arrival". Default          
E1EVMEEM 1 EVTACT Change Type Indicator "I" or "D" or "U" CHAR 1   O  if BSN06 = 'AS' and BSN01 = '00' or '05',  and DTM02 exists with DTM01 = '096'  then hardcode EVTACT = "U" Default          
E1EVMEEM 1 ETXDAT  if BSN06 = 'AS' and BSN01 = '03' and DTM02 exists with DTM01 = '096'  then hardcode EVTACT = "D" Mapped DTM Segment at Order level (HL03 = 'O') (DTM02 + 4 business days) for DTM01 = '537' DT 8  
E1EVMEEM 1 ETXTIM Estimated Date   CHAR 8 CCYYMMDD O if BSN06 = 'AS' and BSN01 = '00 or '05' and  DTM02 exists with DTM01 = '096'  then map ETXDAT = DTM02 Mapped DTM Segment at Order level (HL03 = 'O') DTM03 for DTM01 = '537' TM 4 to 8  
E1EVMEEM 1 ETXZON Estimated Time   CHAR 6 HHMMSS O if BSN06 = 'AS' and BSN01 = '00 or '05' and  DTM03 exists with DTM01 = '096'  then map DTM03 = ETXTIM . No mapping is required if the above condition is not satisfied. Mapped DTM Segment at Order level (HL03 = 'O') DTM04 for DTM01 = '537' ID 2  
E1EVMEEM 1 MSGDAT Time Zone for estimated time   CHAR 6 SAP Standard Timezone Format O if BSN06 = 'AS' and BSN01 = '00 or '05' and  DTM03 or DTM04 exists with DTM01 = '096'  then map DTM04 = ETXZON. If DTM03 exist and there is no time zone(DTM04) in the data, then use port code look up table in GIS to populate time zone field. If there is n Mapped DTM Segment at Order level (HL03 = 'O') (DTM02 + 4 business days) for DTM01 = '537' DT 8  
E1EVMEEM   MSGTIM Message Date   CHAR 8 CCYYMMDD O if BSN06 = 'AS' and BSN01 = '00 or '05' and DTM02 exists with DTM01 = '096'  then map MSGDAT = (DTM02)  Mapped DTM Segment at Order level (HL03 = 'O') DTM03 for DTM01 = '537' TM 4 to 8  
E1EVMEEM 1 MSGZON Message Time   CHAR 6 HHMMSS O if BSN06 = 'AS' and BSN01 = '00 or '05' and  DTM03 exists with DTM01 = '096'  then map MSGTIM  = (DTM03)  Mapped DTM Segment at Order level (HL03 = 'O') DTM04 for DTM01 = '537' ID 2  
      Message Time Zone   CHAR 6 SAP Standard Timezone Format O if BSN06 = 'AS' and BSN01 = '00 or '05' and DTM03 or DTM04 exists with DTM01 = '096'  then map MSGZON = DTM04 . If DTM03 exist and there is no time zone(DTM04) in the data, then use port code look up table in GIS to populate time zone field. If there is n          
E1EVMEEM 1 EVTID Event Code ID "COMPLETE_DOC" CHAR 50   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05' and DTM01 = '537'  and DTM02 exists then hardcode  EVTID = "COMPLETE_DOC". Default          
E1EVMEEM 1 EVTACT Change Type Indicator "I" or "D" or "U" CHAR 1   O  if BSN06 = 'AS' and BSN01 = '00' or '05',  and DTM02 exists with DTM01 = '537'  then hardcode EVTACT = "I"
 if BSN06 = 'AS' and BSN01 = '03' and DTM02 exists with DTM01 = '537'  then hardcode EVTACT = "D"		 Default          
E1EVMEEM 1 ETXDAT Estimated Date   CHAR 8 CCYYMMDD O if BSN06 = 'AS' and BSN01 = '00 or '05' and  DTM02 exists with DTM01 = '537'  then map ETXDAT = (DTM02 + 4 BUSINESS DAYS) . No mapping is required if the above condition is not satisfied.  Note: If the DTM02 is Saturday/Sunday then the date will be the ne Mapped DTM Segment at Order level (HL03 = 'O') (DTM02 + 4 business days) for DTM01 = '537' DT 8  
E1EVMEEM 1 ETXTIM Estimated Time   CHAR 6 HHMMSS O if BSN06 = 'AS' and BSN01 = '00 or '05' and  DTM03 exists with DTM01 = '537'  then map DTM03 = ETXTIM . No mapping is required if the above condition is not satisfied. Mapped DTM Segment at Order level (HL03 = 'O') DTM03 for DTM01 = '537' TM 4 to 8  
E1EVMEEM 1 ETXZON Time Zone for estimated time   CHAR 6 SAP Standard Timezone Format O if BSN06 = 'AS' and BSN01 = '00 or '05' and  DTM03 or DTM04 exists with DTM01 = '537'  then map DTM04 = ETXZON. If DTM03 exist and there is no time zone(DTM04) in the data, then use port code look up table in GIS to populate time zone field. If there is n Mapped DTM Segment at Order level (HL03 = 'O') DTM04 for DTM01 = '537' ID 2  
E1EVMEEM 1 MSGDAT Message Date   CHAR 8 CCYYMMDD O if BSN06 = 'AS' and BSN01 = '00 or '05' and DTM02 exists with DTM01 = '537'  then map MSGDAT = (DTM02 + 4 BUSINESS DAYS ). No mapping is required if DTM02 doesn't exists with DTM01 = '537'                                                                    Mapped DTM Segment at Order level (HL03 = 'O') (DTM02 + 4 business days) for DTM01 = '537' DT 8  
E1EVMEEM   MSGTIM Message Time   CHAR 6 HHMMSS O if BSN06 = 'AS' and BSN01 = '00 or '05' and  DTM03 exists with DTM01 = '537'  then map MSGTIM  = (DTM03 + 12 HRS ) i.e. (HHMMSS + 120000). No mapping is required if DTM03 doesn't exists with DTM01 = '537'                                                    Mapped DTM Segment at Order level (HL03 = 'O') DTM03 for DTM01 = '537' TM 4 to 8  
E1EVMEEM 1 MSGZON Message Time Zone   CHAR 6 SAP Standard Timezone Format O if BSN06 = 'AS' and BSN01 = '00 or '05' and DTM03 or DTM04 exists with DTM01 = '537'  then map MSGZON = DTM04 . If DTM03 exist and there is no time zone(DTM04) in the data, then use port code look up table in GIS to populate time zone field. If there is n Mapped DTM Segment at Order level (HL03 = 'O') DTM04 for DTM01 = '537' ID 2  
                             
E1EVMEEM 2 EVTID Event Code ID "ENTRY_FILED" CHAR 50   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05' and DTM01 = ''371'   and DTM02 exists then hardcode EVTID = "ENTRY_FILED" Default          
E1EVMEEM 2 EVTACT Change Type Indicator "I" or "D" or "U" CHAR 1   O  if BSN06 = 'AS' and BSN01 = '00' or '05', and DTM02 exists with DTM01 = ''371' then hardcode EVTACT = "I"
 if BSN06 = 'AS' and BSN01 = '03' and DTM02 exists with DTM01 = ''371' then hardcode EVTACT = "D"		 Default          
E1EVMEEM 2 ETXDAT Estimated Date   CHAR 8 CCYYMMDD O if BSN06 = 'AS' and BSN01 = '00 or '05' and DTM01 =  '371'   and DTM02 exists then map DTM02 = ETXDAT . No mapping is required if DTM02 doesn't exists with DTM01 = '371'                Note: If  time is less then 24 hours after adding 04 hours to DTM03 th Mapped DTM Segment at Shipment Level (HL03 = 'S') DTM02 for DTM01 = '371' DT 8  
E1EVMEEM 2 ETXTIM Estimated Time   CHAR 6 HHMMSS O if BSN06 = 'AS' and BSN01 = '00 or '05'  and DTM01 = ''371'   and DTM03 exists then  map ETXTIM = (DTM03 + 4 hrs i.e. HHMMSS + 040000 hrs). No mapping is required if DTM03 doesn't exists with DTM01 = '371'.       Note: If  time is less then 24 hours after Mapped DTM Segment at Shipment Level (HL03 = 'S') DTM03 for DTM01 = '371' TM 4 to 8  
E1EVMEEM 2 ETXZON Time Zone for estimated time   CHAR 6 SAP Standard Timezone Format O if BSN06 = 'AS' and BSN01 = '00 or '05' if DTM01 = ''371'   and DTM03 or DTM04 exists then map  DTM04 = ETXZON.  If DTM03 exist and there is no time zone(DTM04) in the data, then use port code look up table in GIS to populate time zone field. If there is  Mapped DTM Segment at Shipment Level (HL03 = 'S') DTM04 for DTM01 = '371' ID 2  
E1EVMEEM 2 MSGDAT Message Date   CHAR 8 CCYYMMDD O if BSN06 = 'AS' and BSN01 = '00 or '05' and DTM01 =  '371' and DTM02 exists then map MSGDAT = DTM02 . No mapping is required if DTM02 doesn't exists with DTM01 = '371'  .       Note: If  time is less then 24 hours after adding 04 hours to DTM03 then the d Mapped DTM Segment at Shipment Level (HL03 = 'S') DTM02 for DTM01 = '371' DT 8  
E1EVMEEM 2 MSGTIM Message Time   CHAR 6 HHMMSS O if BSN06 = 'AS' and BSN01 = '00 or '05' and if DTM01 =  '371' and DTM03 exists then map MSGTIM = (DTM03 + 4 hrs i.e. HHMMSS + 040000 hrs) . No mapping is required if DTM03 doesn't exists with DTM01 = '371".      Note: If  time is less then 24 hours after  Mapped DTM Segment at Shipment Level (HL03 = 'S') DTM03 for DTM01 = '371' TM 4 to 8  
E1EVMEEM 2 MSGZON Message Time Zone   CHAR 6 SAP Standard Timezone Format O if BSN06 = 'AS' and BSN01 = '00 or '05' and DTM01 =  '371' and DTM03 or DTM04 exists then map MSGZON = DTM04.  If DTM03 exist and there is no time zone(DTM04) in the data, then use port code look up table in GIS to populate time zone field. If there is no Mapped DTM Segment at Shipment Level (HL03 = 'S') DTM04 for DTM01 = '371' ID 2  
                             
E1EVMEEM 3 EVTID Event Code ID "CUSTOMS_CLEARED" CHAR 50   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05' and DTM01 = ''371'   and DTM02 exists then hardcode EVTID =  "CUSTOMS_CLEARED". No mapping is required if DTM02 doesn't exists with DTM01 = '371' . Default          
E1EVMEEM 3 EVTACT Change Type Indicator "I", "D", "U" CHAR 1   O  if BSN06 = 'AS' and BSN01 = '00' or '05', and DTM02 exists with DTM01 = ''371'   then hardcode EVTACT = "I"
 if BSN06 = 'AS' and BSN01 = '03' then EVTACT = "D"		 Default          
E1EVMEEM 3 ETXDAT Estimated Date   CHAR 8 CCYYMMDD O if BSN06 = 'AS' and BSN01 = '00 or '05' and DTM01 = ''371'   and DTM02 exists then  map ETXDAT = (DTM02 + 2 BUSINESS DAYS i.e. CCYYMMDD + 00000002 BUSINESS DAYS) .  No mapping is required if DTM02 doesn't exists with DTM01 = '371' .  Note: If  time is les Mapped DTM Segment at Shipment Level (HL03 = 'S') DTM02 for DTM01 = '371' DT 8  
E1EVMEEM 3 ETXTIM Estimated Time   CHAR 6 HHMMSS O if BSN06 = 'AS' and BSN01 = '00 or '05' and DTM01 =  '371'   and DTM03 exists then map ETXTIM = (DTM03 + 4 HRS. i.e. HHMMSS + 040000) . No mapping is required if DTM03 doesn't exists with DTM01 = '371".      Note: If  time is less then 24 hours after addi Mapped DTM Segment at Shipment Level (HL03 = 'S') DTM03 for DTM01 = '371' TM 4 to 8  
E1EVMEEM 3 ETXZON Time Zone for estimated time   CHAR 6 SAP Standard Timezone Format O if BSN06 = 'AS' and BSN01 = '00 or '05' and  DTM01 =  '371' and DTM03 or DTM04 exists then map ETXZON = DTM04.   If DTM03 exist and there is no time zone(DTM04) in the data, then use port code look up table in GIS to populate time zone field. If there is  Mapped DTM Segment at Shipment Level (HL03 = 'S') DTM04 for DTM01 = '371' ID 2  
E1EVMEEM 3 MSGDAT Message Date   CHAR 8 CCYYMMDD O if BSN06 = 'AS' and BSN01 = '00 or '05' and DTM01 = ''371' and DTM02 exists then  map MSGDAT = (DTM02 + 2 BUSINESS DAYS i.e. CCYYMMDD + 00000002 busniness days(not Calendar days)) . No mapping is required if DTM02 doesn't exists with DTM01 = '371  Note: I Mapped DTM Segment at Shipment Level (HL03 = 'S') DTM02 for DTM01 = '371' DT 8  
E1EVMEEM 3 MSGTIM Message Time   CHAR 6 HHMMSS O if BSN06 = 'AS' and BSN01 = '00 or '05' and DTM01 =  '371' and DTM03 exists then map MSGTIM = (DTM03 + 12 HRS. i.e. HHMMSS + 120000) . No mapping is required if DTM03 doesn't exists with DTM01 = '37 .           Note: If  time is less then 24 hours after a Mapped DTM Segment at Shipment Level (HL03 = 'S') DTM03 for DTM01 = '371' TM 4 to 8  
E1EVMEEM 3 MSGZON Message Time Zone   CHAR 6 SAP Standard Timezone Format O if BSN06 = 'AS' and BSN01 = '00 or '05' and DTM01 =  '371' and DTM03 or DTM04 exists then map  then MSGZON = DTM04.  If DTM03 exist and there is no time zone(DTM04) in the data, then use port code look up table in GIS to populate time zone field. If there Mapped DTM Segment at Shipment Level (HL03 = 'S') DTM04 for DTM01 = '371' ID 2  
                             
E1EVMEEM 4 EVTID Event Code ID "DO_ISSUED" CHAR 50   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05' and DTM01 = ''371' and DTM02 exists then  map EVTID =  "DO_ISSUED". Default          
E1EVMEEM 4 EVTACT Change Type Indicator "I", "D", "U" CHAR 1   O   if BSN06 = 'AS' and BSN01 = '00' or '05',and DTM02 exists with  DTM01 = ''371'  then hard code EVTACT = "I"
 if BSN06 = 'AS' and BSN01 = '03' then EVTACT = "D"		 Default          
E1EVMEEM 4 ETXDAT Estimated Date   CHAR 8 CCYYMMDD O if BSN06 = 'AS' and BSN01 = '00 or '05' and DTM01 = ''371' and DTM02 exists then map  ETXDAT = (DTM02 + 2 BUSINESS DAYS ) . No mapping is required if DTM02 doesn't exists with DTM01 = '371. Note: If  time is less then 24 hours after adding 16 hours to DTM Mapped DTM Segment at Shipment Level (HL03 = 'S') DTM02 for DTM01 = '371' DT 8  
E1EVMEEM 4 ETXTIM Estimated Time   CHAR 6 HHMMSS O if BSN06 = 'AS' and BSN01 = '00 or '05' and  DTM01 = ''371'  and DTM03 exists then  map ETXTIM = (DTM03 + 16 HRS. i.e. HHMMSS + 160000) . No mapping is required if DTM03 doesn't exists with DTM01 = '371.  Note: If  time is less then 24 hours after adding  Mapped DTM Segment at Shipment Level (HL03 = 'S') DTM03 for DTM01 = '371' TM 4 to 8  
E1EVMEEM 4 ETXZON Time Zone for estimated time   CHAR 6 SAP Standard Timezone Format O if BSN06 = 'AS' and BSN01 = '00 or '05' and DTM01 = ''371'  and DTM03 or DTM04 exists then  map ETXZON = DTM04 .  If DTM03 exist and there is no time zone(DTM04) in the data, then use port code look up table in GIS to populate time zone field. If there is Mapped DTM Segment at Shipment Level (HL03 = 'S') DTM04 for DTM01 = '371' ID 2  
E1EVMEEM 4 MSGDAT Message Date   CHAR 8 CCYYMMDD O if BSN06 = 'AS' and BSN01 = '00 or '05' and  DTM01 = ''371' and DTM02 exists then  map MSGDAT = (DTM02 + 2 BUSINESS DAYS i.e. CCYYMMDD + 00000002 BUSINESS DAYS) . No mapping is required if DTM02 doesn't exists with DTM01 = '371  Note: If  time is less the Mapped DTM Segment at Shipment Level (HL03 = 'S') DTM02 for DTM01 = '371' DT 8  
E1EVMEEM 4 MSGTIM Message Time   CHAR 6 HHMMSS O if BSN06 = 'AS' and BSN01 = '00 or '05' and DTM01 = ''371' and DTM03 exists then  map MSGTIM = (DTM03 + 16 HRS. i.e. HHMMSS + 160000) . No mapping is required if DTM03 doesn't exists with DTM01 = '371.  Note: If  time is less then 24 hours after adding 16 Mapped DTM Segment at Shipment Level (HL03 = 'S') DTM03 for DTM01 = '371' TM 4 to 8  
E1EVMEEM 4 MSGZON Message Time Zone   CHAR 6 SAP Standard Timezone Format O if BSN06 = 'AS' and BSN01 = '00 or '05' and DTM01 = ''371'  and DTM03 or DTM04 exists then  map MSGZON = DTM04 . If DTM03 exist and there is no time zone(DTM04) in the data, then use port code look up table in GIS to populate time zone field. If there is  Mapped DTM Segment at Shipment Level (HL03 = 'S') DTM04 for DTM01 = '371' ID 2  
Mapping Loop: The below mapping should be done for each order loop segment in the transaction If there are muiltiple order loops in the EDI 856 - 3 transaction then the Interface should post one parameter for each order for the unique Shipment Number for 
[Data Concept] Parameters Table -- E1EVMPAR                            
E1EVMPAR 1 PARTYP Parameter Type "I" CHAR 1   O if BSN06 = 'AS' and BSN01 = 00 or 03 or 05, then E1EVMPAR.PARTYP = "I" Default        
E1EVMPAR 1 PARAM_NAME Parameter Name "DP_" + REF02 (when REF01 = 'AW') + "_" + PRF01 (from Order Segment i.e. HL03 = 'O') CHAR 32   O if BSN06 = 'AS' and BSN01 = 00 or 03 or 05, then E1EVMPAR.PARAM_NAME = "DP_CTN_" + REF02 (when REF01 = 'AW') + "_" + PRF01 (from order segment i.e. HL03 = 'O') Mapped PRF and REF PRF01 + REF02 (when REF01 = 'AW') - both from the order loop i.e. HL03 = 'O' AN  
E1EVMPAR 1 PARAM_VALUE Parameter Value   CHAR 20   O  - if BSN06 = 'AS' and BSN01 = '00' or '05', then PARAM_VALUE = TD102 from the TD1 segment at the order level
 - if BSN06 = 'AS' and BSN01 = '03', then PARAM_VALUE = 0 (Zero)		 Mapped TD1 TD102 from the order loop i.e. HL03 = 'O' AN 1 to 10
E1EVMPAR 1 ACTION Action Parameter "C" CHAR 1   O if BSN06 = 'AS' and BSN01 = 00 or 03 or 05, then E1EVMPAR.ACTION = "C" Default        
End of mapping loop                          
E1EVMPAR 2 PARTYP Parameter Type "C" CHAR 1   O if BSN06 = 'AS' and BSN01 = 00 or 03 or 05, then E1EVMPAR.PARTYP = "I" Default          
E1EVMPAR 2 PARAM_NAME Parameter Name "CONTAINER_NUMBER" CHAR 32   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then PARAM_NAME = "CONTAINER_NUMBER" Default          
E1EVMPAR 2 PARAM_VALUE Parameter Value   CHAR 20   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then PARAM_VALUE = TD302 + TD303 Mapped TD3 Segment at shipment level TD302 + TD303 AN 2 to 14  
E1EVMPAR 2 ACTION Action Parameter "C" or "D" CHAR 1   O  - if BSN06 = 'AS' and BSN01 = '00' or '05', then ACTION = "C"
 - if if BSN06 = 'AS' and BSN01 = '03', then ACTION = "D"		 Default          
                             
E1EVMPAR 3 PARTYP Parameter Type "C" CHAR 1   O if BSN06 = 'AS' and BSN01 = 00 or 03 or 05, then E1EVMPAR.PARTYP = "I" Default        
E1EVMPAR 3 PARAM_NAME Parameter Name "HAWBFCR" CHAR 32   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then PARAM_NAME = "HAWBFCR" Default        
E1EVMPAR 3 PARAM_VALUE Parameter Value   CHAR 20   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then PARAM_VALUE = REF02 when REF01 = "AW" from the order level loop Mapped REF from order level loop (HL03 = "O") REF02 when REF01 = "AW" AN 1 to 30
E1EVMPAR 3 ACTION Action Parameter "C" or "D" CHAR 1   O  - if BSN06 = 'AS' and BSN01 = '00' or '05', then ACTION = "C"
 - if if BSN06 = 'AS' and BSN01 = '03', then ACTION = "D"		 Default        
                             
E1EVMPAR 3 PARTYP Parameter Type "C" CHAR 1   O if BSN06 = 'AS' and BSN01 = 00 or 03 or 05, then E1EVMPAR.PARTYP = "C" Default          
E1EVMPAR 3 PARAM_NAME Parameter Name "OBOL" CHAR 32   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then PARAM_NAME = "OBOL" Default          
E1EVMPAR 3 PARAM_VALUE Parameter Value   CHAR 20   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then PARAM_VALUE = REF02 when REF01 = "AO" from the order level loop Mapped     AN 1 to 30  
E1EVMPAR 3 ACTION Action Parameter "C" or "D" CHAR 1   O  - if BSN06 = 'AS' and BSN01 = '00' or '05', then ACTION = "C"
 - if if BSN06 = 'AS' and BSN01 = '03', then ACTION = "D"		 Default          
                             
                             
E1EVMPAR 3 PARTYP Parameter Type "C" CHAR 1   O if BSN06 = 'AS' and BSN01 = 00 or 03 or 05, then E1EVMPAR.PARTYP = "I" Default          
E1EVMPAR 3 PARAM_NAME Parameter Name "OBOL_CNTR" CHAR 32   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then PARAM_NAME = "OBOL_CNTR" Default          
E1EVMPAR 3 PARAM_VALUE Parameter Value   CHAR 20   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then PARAM_VALUE = if BSN06 = REF02 when REF01 = 'AO' + TD302 + TD303  Mapped     AN 1 to 30  
E1EVMPAR 3 ACTION Action Parameter "C" or "D" CHAR 1   O  - if BSN06 = 'AS' and BSN01 = '00' or '05', then ACTION = "C"
 - if if BSN06 = 'AS' and BSN01 = '03', then ACTION = "D"		 Default          
                             
E1EVMPAR 4 PARTYP Parameter Type "C" CHAR 1   O if BSN06 = 'AS' and BSN01 = 00 or 03 or 05, then E1EVMPAR.PARTYP = "I" Default        
E1EVMPAR 4 PARAM_NAME Parameter Name "VESSEL_NAME" CHAR 32   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then PARAM_NAME = "VESSEL_NAME" Default        
E1EVMPAR 4 PARAM_VALUE Parameter Value   CHAR 20   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then PARAM_VALUE = N102 when N101 = 'VS' from the shipment level loop Mapped N1 from the Shipment level loop N102 when N101 = 'VS' AN 1 to 60
E1EVMPAR 4 ACTION Action Parameter "C" or "D" CHAR 1   O  - if BSN06 = 'AS' and BSN01 = '00' or '05', then ACTION = "C"
 - if if BSN06 = 'AS' and BSN01 = '03', then ACTION = "D"		 Default        
                             
E1EVMPAR 1 PARAM_NAME Parameter Name "Voyage" CHAR 32   O if BSN06 = '60' and BSN01 = 00 or 03 or 05, then E1EVMPAR.PARAM_NAME = "Voyage_flt_number" Default          
E1EVMPAR 1 PARAM_VALUE Parameter Value   CHAR 20   O param_value = REF02 (shipment level) when REF01 = AV Mapped     AN 10  
E1EVMPAR 1 ACTION Action Parameter "C" CHAR 1   O if BSN06 = '60' and BSN01 = 00 or 03 or 05, then E1EVMPAR.ACTION = "C" Default          
E1EVMPAR 1 PARTYP Parameter Type "I" CHAR 1   O if BSN06 = '60' and BSN01 = 00 or 03 or 05, then E1EVMPAR.PARTYP = "I" Default          
                               
                             
E1EVMPAR 5 PARTYP Parameter Type "C" CHAR 1   O if BSN06 = 'AS' and BSN01 = 00 or 03 or 05, then E1EVMPAR.PARTYP = "I" Default        
E1EVMPAR 5 PARAM_NAME Parameter Name "MCC" CHAR 32   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then PARAM_NAME = "MCC" Default        
E1EVMPAR 5 PARAM_VALUE Parameter Value   CHAR 20   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then PARAM_VALUE = YNQ02 when YNQ01 = 'ZZ' from the order level loop Mapped YNQ02 from the order level loop YNQ02 when YNQ01 = 'ZZ' ID 1
E1EVMPAR 5 ACTION Action Parameter "C" or "D" CHAR 1   O  - if BSN06 = 'AS' and BSN01 = '00' or '05', then ACTION = "C"
 - if if BSN06 = 'AS' and BSN01 = '03', then ACTION = "D"		 Default        
                             
E1EVMPAR 6 PARTYP Parameter Type "C" CHAR 1   O if BSN06 = 'AS' and BSN01 = 00 or 03 or 05, then E1EVMPAR.PARTYP = "I" Default        
E1EVMPAR 6 PARAM_NAME Parameter Name "Container Size" CHAR 32   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then PARAM_NAME = "CONTAINER_SIZE" Default        
E1EVMPAR 6 PARAM_VALUE Parameter Value   CHAR 20   O (if BSN06 = 'AS' and BSN01 = '00' or '03' or '05') and if TD305 = '210' then PARAM_VALUE = "STANDARD DRY 20 FEET", if TD305 = '220' then PARAM_VALUE = "GOH 20 FEET", if TD305 = 230 then PARAM_VALUE = "20 FEET COMBINATION", if TD305 = "410" then PARAM_VALU Mapped TD3 from the Shipment Level TD305 R 1 to 10
E1EVMPAR 6 ACTION Action Parameter "C" or "D" CHAR 1   O  - if BSN06 = 'AS' and BSN01 = '00' or '05', then ACTION = "C"
 - if if BSN06 = 'AS' and BSN01 = '03', then ACTION = "D"		 Default        
                             
E1EVMPAR 7 PARTYP Parameter Type "I" CHAR 1   O if BSN06 = 'AS' and BSN01 = 00 or 03 or 05, then E1EVMPAR.PARTYP = "I" Default        
E1EVMPAR 7 PARAM_NAME Parameter Name "FINAL_DEST_ETA_DATE" CHAR 32   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then PARAM_NAME = "FINAL_DEST_ETA_DATE" Default        
E1EVMPAR 7 PARAM_VALUE Parameter Value   CHAR 20   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then PARAM_VALUE = DTM02 when DTM01 = "017" from the shipment level loop (HL03 = "S") Mapped DTM from shipment level loop DTM02 when DTM01 = "017" DT 8
E1EVMPAR 7 ACTION Action Parameter "C" CHAR 1   O  - if BSN06 = 'AS' and BSN01 = '00' or '05', then ACTION = "C"
 - if if BSN06 = 'AS' and BSN01 = '03', then ACTION = "D"		 Default        
                             
E1EVMPAR 8 PARTYP Parameter Type "I" CHAR 1   O if BSN06 = 'AS' and BSN01 = 00 or 03 or 05, then E1EVMPAR.PARTYP = "I" Default        
E1EVMPAR 8 PARAM_NAME Parameter Name "FINAL_DEST_ETA_TIME" CHAR 32   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then PARAM_NAME = "FINAL_DEST_ETA_TIME" Default        
E1EVMPAR 8 PARAM_VALUE Parameter Value   CHAR 20   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then PARAM_VALUE = DTM03 when DTM01 = "017" from the shipment level loop (HL03 = "S") Mapped DTM from shipment level loop DTM03 when DTM01 = "017" DT 8
E1EVMPAR 8 ACTION Action Parameter "C" CHAR 1   O  - if BSN06 = 'AS' and BSN01 = '00' or '05', then ACTION = "C"
 - if if BSN06 = 'AS' and BSN01 = '03', then ACTION = "D"		 Default        
                             
E1EVMPAR 9 PARTYP Parameter Type "I" CHAR 1   O if BSN06 = 'AS' and BSN01 = 00 or 03 or 05, then E1EVMPAR.PARTYP = "I" Default        
E1EVMPAR 9 PARAM_NAME Parameter Name "FINAL_DEST_ETA_TZONE" CHAR 32   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then PARAM_NAME = "FINAL_DEST_ETA_TZONE" Default        
E1EVMPAR 9 PARAM_VALUE Parameter Value   CHAR 20   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then PARAM_VALUE = DTM04 when DTM01 = "017" from the shipment level loop (HL03 = "S") Mapped DTM from shipment level loop DTM04 when DTM01 = "017" DT 8
E1EVMPAR 9 ACTION Action Parameter "C" CHAR 1   O  - if BSN06 = 'AS' and BSN01 = '00' or '05', then ACTION = "C"
 - if BSN06 = 'AS' and BSN01 = '03', then ACTION = "D"		 Default        
             
E1EVMPAR 10 PARTYP Parameter Type "C" CHAR 1   O if BSN06 = 'AS' and BSN01 = 00 or 03 or 05, then E1EVMPAR.PARTYP = "I" Default          
E1EVMPAR 10 PARAM_NAME Parameter Name "FINAL_DEST_LOC_ID" CHAR 32   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then PARAM_NAME = "FINAL_DEST_LOC_ID" Default          
E1EVMPAR 10 PARAM_VALUE Parameter Value   CHAR 20   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then PARAM_VALUE = TD508 when TD507 = "DE" Mapped TD5 at the shipment level TD508 when TD507 = "DE" AN 1 to 30  
E1EVMPAR 10 ACTION Action Parameter "C"or "D" CHAR 1   O  - if BSN06 = 'AS' and BSN01 = '00' or '05', then ACTION = "C"
 - if BSN06 = 'AS' and BSN01 = '03', then ACTION = "D"		 Default          
               
E1EVMPAR 11 PARTYP Parameter Type "I" CHAR 1   O if BSN06 = 'AS' and BSN01 = 00 or 03 or 05, then E1EVMPAR.PARTYP = "I" Default        
E1EVMPAR 11 PARAM_NAME Parameter Name "PORT_OF_DISCHARGE_ETA_DATE" CHAR 32   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then PARAM_NAME = "PORT_OF_DISCHARGE_ETA_DATE" Default        
E1EVMPAR 11 PARAM_VALUE Parameter Value   CHAR 20   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then PARAM_VALUE = DTM02 when DTM01 = "096" from the shipment level loop (HL03 = "S") Mapped DTM from shipment level loop DTM02 when DTM01 = "096" DT 8
E1EVMPAR 11 ACTION Action Parameter "C" CHAR 1   O  - if BSN06 = 'AS' and BSN01 = '00' or '05', then ACTION = "C"
 - if if BSN06 = 'AS' and BSN01 = '03', then ACTION = "D"		 Default        
             
E1EVMPAR 12 PARTYP Parameter Type "I" CHAR 1   O if BSN06 = 'AS' and BSN01 = 00 or 03 or 05, then E1EVMPAR.PARTYP = "I" Default        
E1EVMPAR 12 PARAM_NAME Parameter Name "PORT_OF_DISCHARGE_ETA_TIME" CHAR 32   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then PARAM_NAME = "PORT_OF_DISCHARGE_ETA_TIME" Default        
E1EVMPAR 12 PARAM_VALUE Parameter Value   CHAR 20   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then PARAM_VALUE = DTM03 when DTM01 = "096" from the shipment level loop (HL03 = "S") Mapped DTM from shipment level loop DTM03 when DTM01 = "096" DT 8
E1EVMPAR 12 ACTION Action Parameter "C" CHAR 1   O  - if BSN06 = 'AS' and BSN01 = '00' or '05', then ACTION = "C"
 - if if BSN06 = 'AS' and BSN01 = '03', then ACTION = "D"		 Default        
               
E1EVMPAR 13 PARTYP Parameter Type "I" CHAR 1   O if BSN06 = 'AS' and BSN01 = 00 or 03 or 05, then E1EVMPAR.PARTYP = "I" Default        
E1EVMPAR 13 PARAM_NAME Parameter Name "PORT_OF_DISCHARGE_ETA_TZONE" CHAR 32   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then PARAM_NAME = "PORT_OF_DISCHARGE_ETA_TZONE" Default        
E1EVMPAR 13 PARAM_VALUE Parameter Value   CHAR 20   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then PARAM_VALUE = DTM04 when DTM01 = "096" from the shipment level loop (HL03 = "S") Mapped DTM from shipment level loop DTM04 when DTM01 = "096" DT 8
E1EVMPAR 13 ACTION Action Parameter "C" CHAR 1   O  - if BSN06 = 'AS' and BSN01 = '00' or '05', then ACTION = "C"
 - if BSN06 = 'AS' and BSN01 = '03', then ACTION = "D"		 Default        
               
E1EVMPAR 14 PARTYP Parameter Type "C" CHAR 1   O if BSN06 = 'AS' and BSN01 = 00 or 03 or 05, then E1EVMPAR.PARTYP = "I" Default          
E1EVMPAR 14 PARAM_NAME Parameter Name "PORT_OF_DISHCARGE_LOC_ID" CHAR 32   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then PARAM_NAME = "PORT_OF_DISCHARGE_LOC_ID" Default        
E1EVMPAR 14 PARAM_VALUE Parameter Value   CHAR 20   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then PARAM_VALUE = TD508 when TD504 = "S" and TD507 = "PA" Mapped TD5 at the shipment level TD508 when TD504 = "S" and TD507 = "PA" AN 1 to 30
E1EVMPAR 14 ACTION Action Parameter "C" or "D" CHAR 1   O  - if BSN06 = 'AS' and BSN01 = '00' or '05', then ACTION = "C"
 - if BSN06 = 'AS' and BSN01 = '03', then ACTION = "D"		 Default          
               
E1EVMPAR 15 PARTYP Parameter Type "I" CHAR 1   O if BSN06 = 'AS' and BSN01 = 00 or 03 or 05, then E1EVMPAR.PARTYP = "I" Default        
E1EVMPAR 15 PARAM_NAME Parameter Name "PORT_OF_ENTRY_ETA_DATE" CHAR 32   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then PARAM_NAME = "PORT_OF_ENTRY_ETA_DATE" Default        
E1EVMPAR 15 PARAM_VALUE Parameter Value   CHAR 20   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then PARAM_VALUE = DTM02 when DTM01 = "371" from the shipment level loop (HL03 = "S") Mapped DTM from shipment level loop DTM02 when DTM01 = "371" DT 8
E1EVMPAR 15 ACTION Action Parameter "C" CHAR 1   O  - if BSN06 = 'AS' and BSN01 = '00' or '05', then ACTION = "C"
 - if if BSN06 = 'AS' and BSN01 = '03', then ACTION = "D"		 Default        
             
E1EVMPAR 16 PARTYP Parameter Type "I" CHAR 1   O if BSN06 = 'AS' and BSN01 = 00 or 03 or 05, then E1EVMPAR.PARTYP = "I" Default        
E1EVMPAR 16 PARAM_NAME Parameter Name "PORT_OF_ENTRY_ETA_TIME" CHAR 32   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then PARAM_NAME = "PORT_OF_ENTRY_ETA_TIME" Default        
E1EVMPAR 16 PARAM_VALUE Parameter Value   CHAR 20   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then PARAM_VALUE = DTM03 when DTM01 = "371" from the shipment level loop (HL03 = "S") Mapped DTM from shipment level loop DTM03 when DTM01 = "371" DT 8
E1EVMPAR 16 ACTION Action Parameter "C" CHAR 1   O  - if BSN06 = 'AS' and BSN01 = '00' or '05', then ACTION = "C"
 - if if BSN06 = 'AS' and BSN01 = '03', then ACTION = "D"		 Default        
               
E1EVMPAR 17 PARTYP Parameter Type "I" CHAR 1   O if BSN06 = 'AS' and BSN01 = 00 or 03 or 05, then E1EVMPAR.PARTYP = "I" Default        
E1EVMPAR 17 PARAM_NAME Parameter Name "PORT_OF_ENTRY_ETA_TZONE" CHAR 32   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then PARAM_NAME = "PORT_OF_ENTRY_ETA_TZONE" Default        
E1EVMPAR 17 PARAM_VALUE Parameter Value   CHAR 20   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then PARAM_VALUE = DTM04 when DTM01 = "371" from the shipment level loop (HL03 = "S") Mapped DTM from shipment level loop DTM04 when DTM01 = "371" DT 8
E1EVMPAR 17 ACTION Action Parameter "C" CHAR 1   O  - if BSN06 = 'AS' and BSN01 = '00' or '05', then ACTION = "C"
 - if BSN06 = 'AS' and BSN01 = '03', then ACTION = "D"		 Default        
               
E1EVMPAR 18 PARTYP Parameter Type "C" CHAR 1   O if BSN06 = 'AS' and BSN01 = 00 or 03 or 05, then E1EVMPAR.PARTYP = "I" Default          
E1EVMPAR 18 PARAM_NAME Parameter Name "PORT_OF_ENTRY_LOC_ID" CHAR 32   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then PARAM_NAME = "PORT_OF_ENTRY_LOC_ID" Default        
E1EVMPAR 18 PARAM_VALUE Parameter Value   CHAR 20   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then PARAM_VALUE = TD508 when TD504 = "S" and TD507 = "PE" Mapped TD5 at the shipment level TD508 when TD504 = "S" and TD507 = "PE" AN 1 to 30
E1EVMPAR 18 ACTION Action Parameter "C" or "D" CHAR 1   O  - if BSN06 = 'AS' and BSN01 = '00' or '05', then ACTION = "C"
 - if BSN06 = 'AS' and BSN01 = '03', then ACTION = "D"		 Default          
E1EVMPAR 9 PARTYP Parameter Type "I" CHAR 1   O if BSN06 = 'AS' and BSN01 = 00 or 03 or 05, then E1EVMPAR.PARTYP = "I" Default          
E1EVMPAR 9 PARAM_NAME Parameter Name "Dox_recv_date" CHAR 32   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then PARAM_NAME = "Dox_recv_date" Default          
E1EVMPAR 9 PARAM_VALUE Parameter Value   CHAR 20   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then PARAM_VALUE = DTM02 when DTM01 = "537" from the order level loop (HL03 = "O") Mapped DTM from order level loop DTM02 when DTM01 = "537" DT 8  
E1EVMPAR 9 ACTION Action Parameter "C" CHAR 1   O  - if BSN06 = 'AS' and BSN01 = '00' or '05', then ACTION = "C"
 - if BSN06 = 'AS' and BSN01 = '03', then ACTION = "D"		 Default          
                             
E1EVMPAR 18 ACTION Action Parameter "C" or "D" CHAR 1   O  - if BSN06 = 'AS' and BSN01 = '00' or '05', then ACTION = "C"
 - if BSN06 = 'AS' and BSN01 = '03', then ACTION = "D"		 Default          
E1EVMPAR 9 PARTYP Parameter Type "I" CHAR 1   O if BSN06 = 'AS' and BSN01 = 00 or 03 or 05, then E1EVMPAR.PARTYP = "I" Default          
E1EVMPAR 9 PARAM_NAME Parameter Name "Dox_recv_time" CHAR 32   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then PARAM_NAME = "Dox_recv_time" Default          
E1EVMPAR 9 PARAM_VALUE Parameter Value   CHAR 20   O if BSN06 = 'AS' and BSN01 = '00' or '03' or '05', then PARAM_VALUE = DTM03 when DTM01 = "537" from the order level loop (HL03 = "O") Mapped DTM from order level loop DTM03 when DTM01 = "537" DT 8  
                             
                             
                             
Document History
Created By:   Meena Kumba     Date Created:     9/18/2005            
Revised By:   Amit Sethi     Date Revised     27/01/2006            
Reviewed By:         Date Reviewed:                  
Approved By:         Date approved:                  
Modification History                          
Version 2:
1. Updated BAPI Tables to reflect IDOC segments
2. Updated changes based on EDI workshop meetings 
                             
[1]
Enter the type of data covered on this field map.  For master data, enter Master Data - <category>.
For other data, enter description.
[2]
Process Team member
[3]
Process Team member
[4]
Process Team member
[5]
Process Team member
[6]
Process Team member
[7]
Process Team member
[8]
Process Team member
[9]
Process Team member
[10]
Legacy System Analyst
[11]
Legacy Systems Analyst
[12]
Legacy System Analyst
[13]
Legacy System Analyst
[14]
Go to screen in SAP.
Highlight field.
Press F1 or click on Help to open.
Enter table name from field data section in Help screen.
[15]
Go to screen in SAP.
Highlight field.
Press F1 or click Help to open.
Enter field name from field data section in Help screen.
[16]
Go to screen in SAP.
Highlight field.
Press F1 or click Help to open.
Highlight data element in Help screen, double click to open.
Enter short text from data element screen.
[17]
Go to screen in SAP.
Highlight field.
Press F1 or click on Help to open.
Highlight data element, double click to open.
Enter data type from data element screen.
[18]
Go to screen in SAP.
Highlight field.
Press F1 or click on Help to open.
Highlight data element, double click to open.
Enter No. of characters from data element screen.
[19]
Acceptable values for this cell are:
S - Suppress
R - Required entry
O - Optional entry
[20]
Enter any logic to be followed by the conversion developer, such as:
how to handle field lengths that are not equal
what default value to use if the legacy field is empty or not valid.
legacy fields to be used in conversion that do not directly map to SAP fields.
[21]

Enter one of the following conversion rule:
R0 -  System Generated.
R1 - Fill with Legacy's system.
R2 - Fill with default, select value based on conversion logic.
R3 - Fill with Legacy if available, else fill with default.
R4 - Fill from prior screen.
R9 - No Conversion. Manual online entry post go-live.
If you do not know yet what rule to put in, leave this column blank.


[22]
Enter the name or ID of the legacy system table or file where this field is located.
[23]
Enter the name or ID of the legacy field that maps to the SAP field already entered on this row.
[24]
Enter the format of the legacy field.
Examples are:
alpha - full text, alpha - abbreviated text
date (indicate exact format)
alphanumeric (indicate exact sequence using a for alpha character, n for numeric character)
numeric (indicate any hyphens, slashes, spaces, etc.)
[25]
Enter the exact number of characters allowed for this field on the source table or file.